Rigidized® Metals in Color
Rigidized® Metals offers colored stainless steel in various finishes and nearly all deep textures. Using Titanium Nitride (TiN) and Light Interference Coloring (LIC), which are hard, inert, thin, and transparent molecular coatings, we beautify ordinary stainless in golds, bronzes, and blacks.
Note: Representations of TiN and LIC color samples shown may vary from actual colors. Colors can be verified by requesting samples.
Textured samples below are shown in Rigidized® Metals’ 6WL® pattern; most patterns are available.
Highlighted Metal
The highlighting process polishes the tops of Rigidized® Metals textures in stainless steel to expose the base metal, greatly reducing the risk of paint damage. Base metal patterns hide scratches, dents and damage often found on smooth painted or colored surfaces. Highlighting can be applied to most colored and powder coated Rigidized® Metals textures. Powder coatings are extremely durable, electronically charged and baked on polyurethane enamels. Powder coating and highlighting can be produced in a wide variety of colors. For consistency, we recommend and use the RAL color system for powder coating.
Allen (RTP®, Prime Side)
Arlington (6WL®, Prime)
Cobblestone (1NA®, Non-Prime)
Delaware (6SL®, Prime)
Elmwood (5WL®, Prime)
Linden (6HC, Non-Prime)
Middlesex (6WL®, Non-Prime)
Niagara (2FL, Prime)
Richmond (4LB, Non-Prime)
Virginia (5WL®, Non-Prime)
1UN in RAL 5021 Water Blue (Prime)
Colored Stainless Steel
Gold Satin (TiN)
For use in interior applications, only.
Available in 48” x 96”; 48” x 120”; and 48” x 144”
Gold Satin (TiN) in 6WL®
Bronze Satin (LIC)
For use in interior applications, only.
Available in 49.21” x 98.43” and 49.21” x 118.11”
Bronze Satin (LIC) in 6WL®
Black Satin (LIC)
For use in interior applications, only.
Available in 49.21” x 98.43” and 49.21” x 118.11”
Black Satin (LIC) in 6WL®
InvariMatte® Walnut
For use in interior and exterior applications.
Max Width: 48″*
Available Thicknesses: 0.060″ & 0.029″ gauge (ATI 2205 alloy, only)
*Please note that, on the InvariMatte® Walnut, there will be (2) hanger holes about ¼” in from the edge on the lateral side. This cannot be avoided and should be considered in your design. We are also limited to 96″ length due to the size of the anodizing tank. Width and length may ultimately be limited by substrate size restrictions.
