Using Titanium Nitride (TiN) and Light Interference Coloring (LIC), which are hard, inert, thin, and transparent molecular coatings, we beautify ordinary stainless in golds, bronzes, blues, and blacks.

Rigidized® Metals in Color

Rigidized® Metals offers colored stainless steel in various finishes and nearly all deep textures. Using Titanium Nitride (TiN) and Light Interference Coloring (LIC), which are hard, inert, thin, and transparent molecular coatings, we beautify ordinary stainless in golds, bronzes, blues, and blacks.

Note: Representations of TiN and LIC color samples shown may vary from actual colors. Colors can be verified by requesting samples.

Textured samples below are shown in Rigidized® Metals’ 6WL® pattern; most patterns are available.

Colored Stainless Steel

Rose Satin (TiN)

For use in interior applications, only.
Available in 48” x 96”; 48” x 120”; and 48” x 144”

Request a Sample

Rose Satin (TiN) in 6WL®

Coffee Satin (TiN)

For use in interior applications, only.
Available in 48” x 96”; 48” x 120”; and 48” x 144”

Request a Sample

Coffee Satin (TiN) in 6WL®

Gold Satin (TiN)

For use in interior applications, only.
Available in 48” x 96”; 48” x 120”; and 48” x 144”

Request a Sample

Gold Satin (TiN) in 6WL®

Nickel Silver Satin (TiN)

For use in interior applications, only.
Available in 48” x 96”; 48” x 120”; and 48” x 144”

Request a Sample

Nickel Silver Satin (TiN) in 6WL®

Bronze Satin (LIC)

For use in interior and exterior applications.
Available in 49.21” x 98.43” and 49.21” x 118.11”

Request a Sample

Bronze Satin (LIC) in 6WL®

Black Satin (LIC)

For use in interior and exterior applications.
Available in 49.21” x 98.43” and 49.21” x 118.11”

Request a Sample

Black Satin (LIC) in 6WL®

Blue Satin (LIC)

For use in interior and exterior applications.
Available in 49.21” x 98.43” and 49.21” x 118.11”

Request a Sample

Blue Satin (LIC) in 6WL®

InvariMatte® Walnut

Max Width: 48″*

Available Thicknesses: 0.060″ & 0.029″ gauge (ATI 2003 alloy, only)

*Please note that, on the InvariMatte® Walnut, there will be (2) hanger holes about ¼” in from the edge on the lateral side. This cannot be avoided and should be considered in your design. We are also limited to 96″ length due to the size of the anodizing tank. Width and length may ultimately be limited by substrate size restrictions.

Request a Sample

Highlighted Metal

The highlighting process polishes the tops of Rigidized® Metals textures in stainless steel to expose the base metal, greatly reducing the risk of paint damage. Base metal patterns hide scratches, dents and damage often found on smooth painted or colored surfaces. Highlighting can be applied to most colored and powder coated Rigidized® Metals textures. Powder coatings are extremely durable, electronically charged and baked on polyurethane enamels. Powder coating and highlighting can be produced in a wide variety of colors. For consistency, we recommend and use the RAL color system for powder coating.

Allen (RTP®, Prime Side)

Request a Sample

Arlington (6WL®, Prime)

Request a Sample

Cobblestone (1NA®, Non-Prime)

Request a Sample

Delaware (6SL®, Prime)

Request a Sample

Elmwood (5WL®, Prime)

Request a Sample

Linden (6HC, Non-Prime)

Request a Sample

Middlesex (6WL®, Non-Prime)

Request a Sample

Niagara (2FL, Prime)

Request a Sample

Richmond (4LB, Non-Prime)

Request a Sample

Virginia (5WL®, Non-Prime)

Request a Sample

1UN in Black Satin (Non-Prime)

Request a Sample

Explore the markets that Rigidized® Metals’ products serve.